#8
Genuine used Land Rover Discovery 4 L319 Third Row Driver-Side Seat Belt Buckle / Stalk, removed from a 3.0L diesel vehicle.
This is the seat belt buckle receiver/stalk fitted to the third-row folding seat and is suitable as a replacement for a damaged, faulty or missing original unit.
Part Number: 608076400A
Part Type: Seat Belt Buckle / Receiver / Stalk
Position: Third Row / Rear Boot Seat
Vehicle Side: Driver Side / O/S on UK RHD vehicles
System: Supplemental Restraint / Seat Belt System
Manufacturer: Land Rover
Condition: Used genuine OEM part
Donor Vehicle Reference
Land Rover Discovery 4
Chassis: L319
Year: 2010
Engine: 3.0L TDV6 Diesel
Drive: RHD
Position: Third Row Driver Side / O/S
Compatibility
Confirmed application:
• Land Rover Discovery 4 L319
• 2010
• 2011
• 2012
• 2013
• 3.0 TDV6 Diesel
• 3.0 SDV6 Diesel where matching seat/belt specification is fitted
• 7-seat models equipped with folding third-row seats
Exact 608076400A references are documented for 2010-2013 Discovery 4 3.0L third-row applications.
Additional Discovery 3 Application
The 608076400A number also appears on used genuine seat-belt stalks removed from:
• Land Rover Discovery 3 / LR3 L319
• Approximately 2004-2009
• 2.7 TDV6
• Selected 7-seat configurations
Because seating and restraint specifications can vary, Discovery 3 compatibility should be confirmed using the original part number and physical configuration before purchase.
Third Row Seating System
This buckle/stalk is designed for the folding third-row seating arrangement fitted to 7-seat Discovery models.
It provides the receiving point for the corresponding seat belt tongue and forms an important part of the vehicle’s occupant restraint system.
Technical Information
The assembly consists of:
• Seat belt buckle/receiver
• Flexible stalk section
• Seat mounting/anchoring point
• Internal buckle locking mechanism
• Seat belt release mechanism
The buckle should positively latch when the correct seat belt tongue is inserted and release normally when the button is pressed.
Side Identification
For UK right-hand-drive vehicles:
O/S / Right = Driver Side
This listing is for the driver-side third-row buckle/stalk.
Please do not confuse it with the passenger-side third-row stalk.
A corresponding passenger-side unit may carry a different identification number; therefore, always match the original component before ordering.
Common Reasons for Replacement
• Seat belt will not latch
• Buckle will not release correctly
• Broken release button
• Damaged buckle housing
• Bent or damaged stalk
• Seat belt tongue repeatedly releases
• Damage during removal or folding of the third-row seat
• Missing buckle following seat replacement
• Accident-damaged restraint component
Important Safety / Diagnostic Information
Seat belts are safety-critical components.
The buckle should not be used if there is evidence of:
• Accident loading
• Cracking
• Severe corrosion
• Damaged mounting points
• Deformation
• Faulty locking mechanism
• Excessive wear
If the vehicle has been involved in an accident, the complete restraint system should be inspected according to Land Rover repair procedures.
Installation
The buckle/stalk mounts to the third-row seat structure.
Correct mounting hardware and tightening specifications should be used during installation.
Because this is a safety restraint component, professional installation is recommended.
After installation, check that:
• Belt tongue locks securely
• Release button operates correctly
• Stalk is correctly positioned
• Mounting point is secure
• Folding seat operation is unobstructed
Programming / Coding
No conventional ECU programming is normally required when replacing a mechanically equivalent third-row seat belt buckle/stalk.
Any electrical connections present on the original specification must nevertheless be matched correctly.
Important Compatibility Note
Please compare the number on your existing part with:
608076400A
Do not purchase solely by vehicle year or engine size.
Discovery 3 and Discovery 4 L319 models were available with different seating arrangements and restraint components.
Please check:
• Part number
• 7-seat configuration
• Third-row position
• Driver / O/S side
• Mounting arrangement
• Buckle shape
• Electrical connection, if applicable
Matching the original 608076400A number is the safest way to confirm compatibility.
Condition
Genuine used Land Rover OEM part.
Normal signs of previous use may be present, including light marks or cosmetic wear.
Please inspect the listing photographs carefully for the exact condition and components supplied.
Ideal genuine replacement for a Land Rover Discovery 4 L319 2010-2013 7-seat model requiring third-row driver-side seat belt stalk 608076400A.
Type: Seat Belt
Placement on Vehicle: Driver Seat
Brand: Land Rover
Tag #: 3819
Part Number: 608076400A
Manufacturer Part Number: 608076400A
VIN: SALLAAAG5CA604330
Stock #: 30
Universal Fitment: No
Colour: Black
Performance Part: No