#77
GENUINE LAND ROVER DISCOVERY 4 L319 FRONT RIGHT DRIVER SEAT BELT – 8H22-61294-ACW
Genuine used Land Rover front seat belt assembly removed from a 2010 Land Rover Discovery 4 L319 RHD.
This is the front right / O/S driver-side seat belt and retractor assembly, designed as part of the vehicle’s factory occupant restraint system.
Part Number: 8H22-61294-ACW
Engineering Number: 8H22 61294 ACW
Part Type: Front Seat Belt / Retractor Assembly
Position: Front Right
Vehicle Side: O/S / Driver Side on UK RHD vehicles
Colour: Black
System: SRS / Occupant Restraint System
Manufacturer: Land Rover / JLR
Donor Vehicle: 2010 Land Rover Discovery 4 L319
Condition: Genuine used part
COMPATIBILITY
Confirmed application includes:
• Land Rover Discovery 4 / LR4 L319
• 2009 models – configuration dependent
• 2010 models – confirmed application
• 2011 models
• 2012 models
• 2013 models
• 3.0 TDV6 / 306DT applications documented
• Front right-hand seat position
The 8H22-61294-ACW number is also documented on:
• Range Rover Sport L320
• Approximately 2009–2013 applications
• Front right-hand seat position
Because seat belts can differ according to model year, market, restraint specification and vehicle configuration, the complete 8H22-61294-ACW number should be matched before purchase.
TECHNICAL INFORMATION
This assembly combines the seat belt webbing with the retracting mechanism used for the front occupant restraint system.
Designed to:
• Restrain the driver during sudden deceleration or impact
• Retract the belt automatically when released
• Lock the belt during rapid movement/deceleration
• Operate as part of the vehicle’s SRS safety system
• Provide the original factory mounting arrangement
This is a 3-point front seat belt assembly.
SRS / RESTRAINT SYSTEM INFORMATION
The seat belt system works together with the vehicle’s airbags and other SRS components.
Any electrical connector or pretensioner equipment fitted to the supplied assembly must correspond with the original vehicle specification.
Never substitute a different-looking seat belt solely because its mounting points appear similar.
COMMON REASONS FOR REPLACEMENT
Replacement may be required because of:
• Seat belt no longer retracting correctly
• Belt webbing becoming damaged or frayed
• Retractor mechanism sticking
• Belt failing to lock correctly
• Damaged mounting hardware
• SRS / pretensioner-related replacement
• Accident repair
• Damaged or contaminated belt webbing
IMPORTANT SAFETY / DIAGNOSTIC INFORMATION
Seat belts are safety-critical components.
Before fitting, ensure the belt retracts and locks correctly and inspect the webbing, mounting points, connectors and pretensioner assembly where applicable.
A seat belt or pretensioner that has been activated during an accident should not simply be reset and reused without following the manufacturer’s approved repair procedure.
If an SRS warning light is present, the vehicle should be scanned for stored fault codes before parts are replaced.
INSTALLATION
Installation should be carried out following the correct Land Rover workshop procedure.
Ensure:
• All mounting points are secure
• Correct bolts and fixings are used
• Belt webbing is not twisted
• Electrical connectors are correctly connected
• SRS precautions are followed before disconnecting or reconnecting restraint-system components
Professional installation is recommended because this is a safety-critical restraint component.
PROGRAMMING / CODING
The mechanical seat belt assembly itself does not normally require programming.
However, if the vehicle has stored SRS/pretensioner fault codes, diagnostic equipment may be required after installation to diagnose and clear faults once the underlying problem has been repaired.
IMPORTANT COMPATIBILITY NOTE
Please match the complete part number:
8H22-61294-ACW
Do not rely solely on the vehicle year or appearance of the belt.
Land Rover used different seat belt and restraint-system specifications depending on model, production date, market and equipment.
For a UK RHD Discovery 4, this listing refers to the front right O/S driver’s position.
CONDITION
Genuine used Land Rover part.
Normal age-related marks and signs of previous use may be present. Please inspect all supplied photographs carefully for the exact condition of the webbing, retractor, connectors, mounting points and trim.
Genuine replacement Land Rover Discovery 4 L319 front right O/S driver seat belt assembly – 8H22-61294-ACW.
Type: Seat Belt
Placement on Vehicle: Front
Brand: Land Rover
Manufacturer Part Number: 8h22-61294-acw