Land Rover discovery 4 2010 l319 3rd row right OS seat leather

#105

1791061-YDP

Genuine Land Rover Discovery 4 L319 3rd Row Right O/S Leather Folding Seat – 2010

Genuine Land Rover/JLR used third-row right-hand leather folding passenger seat assembly, removed from a 2010 Land Rover Discovery 4 L319 7-seat model.

This is the right-hand third-row / rearmost folding seat, located in the rear luggage compartment area. On a UK right-hand-drive Discovery 4 this corresponds to the O/S / offside / driver-side third-row passenger seat.

Part Type: Third Row Folding Rear Seat / Leather Seat Assembly

Position: Third Row / Row 3 / Rearmost Seat

Vehicle Side: Right / RH / O/S – Driver Side on UK RHD vehicles

Upholstery: Leather

Seat Configuration: 7 Seat

Vehicle Platform: Discovery 4 L319

Donor Vehicle: 2010 Land Rover Discovery 4 L319

Manufacturer: Land Rover / JLR

Condition: Used Genuine Land Rover Part

COMPATIBILITY

Land Rover Discovery 4 – L319

Verified JLR catalogue applications include:

• Discovery 4 L319 – 2010-2016

• 2010 donor vehicle directly applicable

• From VIN AA000001 for the original Discovery 4 third-row seat system

• 7-seat configuration

• Third-row / Row 3 seating

• Right-hand third-row seat

• UK RHD: O/S / driver side

• Leather-equipped vehicles where the upholstery specification matches

• Petrol and diesel models where the corresponding 7-seat interior is fitted

The official JLR catalogue specifically separates RH and LH third-row seat components, including the cushion upholstery, backrest upholstery and seat-frame/latch components.

This confirms that the third-row seat system contains side-specific components.

IMPORTANT POSITION INFORMATION

This item is the:

THIRD ROW

RIGHT-HAND SEAT

RH / O/S

DRIVER SIDE – UK RHD

For UK vehicles:

RH = Right Hand

O/S = Offside

Driver Side

Therefore the recommended description is:

Discovery 4 L319 3rd Row Right O/S Leather Folding Seat

It should not be confused with:

• Second-row RH seat

• Second-row outer seat

• Third-row LH/N/S seat

• Front driver seat

• Individual seat cushion or backrest upholstery only

7-SEAT / THIRD-ROW INFORMATION

This seat is specifically designed for the:

7-SEAT DISCOVERY 4 L319

The Discovery 4 seven-seat configuration uses two individual folding seats in the rear luggage compartment area.

These provide additional passenger capacity when raised and can fold down into the rear floor area when not required.

The third-row arrangement includes:

• RH third-row folding seat

• LH third-row folding seat

• Seat cushions

• Seat backrests

• Head restraints

• Folding mechanisms

• Seat frames

• Seat latches

• Third-row seat belts

• Seat belt buckles/stalks

• Associated trim and mounting hardware

TECHNICAL INFORMATION

The Discovery 4 third-row seat is designed to provide an additional passenger seating position while allowing the rear load area to remain versatile.

The complete seat assembly can incorporate:

• Metal seat frame

• Folding/pivot mechanism

• Seat cushion

• Seat backrest

• Leather upholstery

• Release mechanism

• Seat latches

• Mounting points

• Associated plastic trim

The seat is designed around the specific floor structure and mounting arrangement of the Discovery 4 L319 seven-seat body configuration.

FOLDING THIRD-ROW SEAT SYSTEM

The third-row seat is designed to fold down when not required.

This allows the rear luggage area to provide a flatter loading surface.

Correct folding operation depends on the condition of the:

• Seat frame

• Pivot points

• Hinges

• Release mechanism

• Seat latches

• Cushion

• Backrest

• Mounting hardware

The official JLR catalogue confirms separate RH and LH third-row seat latches, further demonstrating the side-specific construction of the rear seating system.

LEATHER UPHOLSTERY INFORMATION

The Discovery 4 was produced with several different third-row upholstery specifications.

Depending on trim level and production date, these included variations such as:

• Ebony Black leather

• Almond leather

• Oxford/Windsor leather

• Taurus leather

• Different contrast stitching specifications

• Other later-model colour combinations

For example, JLR separately catalogues RH third-row cushion covers for Almond leather and Ebony Black leather, with different OE references.

Therefore “leather” alone does not guarantee an exact upholstery match.

2010 RH LEATHER UPHOLSTERY REFERENCES

For early Discovery 4 L319 vehicles from VIN AA000001, the JLR catalogue identifies several RH third-row upholstery components.

Examples include:

LR013274 – RH third-row seat cushion cover, Almond leather specification, early VIN application

LR013276 – RH third-row seat cushion cover, Ebony Black leather specification, early VIN application

LR013327 – RH third-row seat back cover for several standard leather/cloth specifications from VIN AA000001

Different references apply to Oxford/Windsor leather and other trim specifications.

These numbers refer to individual upholstery components rather than necessarily the complete seat assembly.

For this reason, the exact complete-seat OE number should not be assumed from the upholstery number alone.

COMMON REASONS FOR REPLACEMENT

Replacement may be required due to:

• Damaged leather upholstery

• Torn leather

• Excessive leather wear

• Scratches or cuts

• Permanent staining

• Damaged stitching

• Collapsed seat foam

• Damaged seat cushion

• Damaged backrest

• Bent seat frame

• Folding mechanism failure

• Broken release mechanism

• Damaged seat latch

• Damaged mounting points

• Broken plastic trim

• Water or moisture damage

• Accident damage

• Interior restoration

• Converting/restoring an incomplete 7-seat interior

IMPORTANT CONDITION CHECKS

Before installation, inspect:

• Leather upholstery condition

• Stitching

• Seat cushion

• Seat backrest

• Internal foam

• Seat frame

• Folding mechanism

• Hinges and pivot points

• Release mechanism

• Seat latches

• Mounting points

• Plastic trim

• Corrosion

• Water damage

• Evidence of accident damage

The seat should fold, unfold and latch correctly.

RIGHT / LEFT IDENTIFICATION

This item is the:

RIGHT / RH THIRD-ROW SEAT

For a UK right-hand-drive Discovery 4:

RH = Right Hand

O/S = Offside

Driver Side

Therefore:

RH / O/S = Driver-Side Third Row

The opposite seat is:

LH / N/S = Passenger-Side Third Row

The official Land Rover catalogue separately identifies RH and LH components within the third-row seat system.

ENGINE COMPATIBILITY

This seat is not engine-specific.

It may therefore be suitable for compatible Discovery 4 L319 7-seat vehicles equipped with engines such as:

• 2.7 TDV6

• 3.0 TDV6

• 3.0 SDV6

• Petrol engines offered in other markets

Engine size should not be used as the primary compatibility check.

Compatibility is primarily determined by:

• L319 vehicle platform

• Production year / VIN

• 7-seat configuration

• Third-row position

• RH/O/S application

• Seat frame and mounting design

• Leather type

• Upholstery colour and stitching

2010 DISCOVERY 4 APPLICATION

For your item:

Vehicle: Land Rover Discovery 4

Platform: L319

Year: 2010

Seat Configuration: 7 Seat

Position: Third Row / Row 3

Side: Right / RH / O/S

UK Position: Driver Side

Upholstery: Leather

Part Type: Complete Folding Rear Seat / Seat Assembly

The official JLR catalogue confirms the RH third-row seating components for the Discovery 4 L319 from VIN AA000001.

PART NUMBER INFORMATION

Exact complete-seat OE number: Not confirmed from the information supplied.

Land Rover uses different part numbers within the third-row seat assembly according to:

• RH or LH position

• Seat cushion

• Seat backrest

• Seat frame components

• Upholstery material

• Leather colour

• Contrast stitching

• Model year

• VIN range

Therefore an exact OE number should not be assigned to the complete used seat without checking its identification label and trim specification.

If a Land Rover label or engineering number is present underneath the seat/frame, this should be added to the listing.

INSTALLATION

Installation should be carried out according to the appropriate Land Rover workshop procedure.

During installation:

• Confirm RH / O/S third-row position

• Confirm the vehicle has the 7-seat configuration

• Compare the replacement with the original seat

• Compare all mounting points

• Inspect the seat frame

• Inspect the folding mechanism

• Inspect the latches

• Position the seat correctly

• Secure all mounting hardware correctly

• Tighten fasteners to Land Rover specifications

• Raise and lower the seat several times

• Confirm the seat locks securely in its passenger position

• Confirm it folds correctly into the load-floor position

• Check surrounding trim

• Check third-row seat belt routing and operation

Correct installation is essential because this is an occupant seating component.

PROGRAMMING / CODING

Programming Required: No

Coding Required: No

The standard Discovery 4 third-row folding seat is mechanically operated and does not normally require electronic programming or coding after replacement.

IMPORTANT COMPATIBILITY NOTE

Before ordering, please compare:

• Land Rover Discovery 4 L319

• Vehicle production year / VIN

• 7-seat configuration

• Third-row / Row 3 position

• Right / RH / O/S side

• Leather upholstery type

• Leather colour

• Stitching colour

• Seat-panel pattern

• Seat frame design

• Folding mechanism

• Seat latch design

• Mounting points

• Headrest specification if included

• Listing photographs

Do not rely solely on “Discovery 4 leather rear seat” when ordering.

The Discovery 4 has different second-row and third-row seats, and the third-row system uses separate RH and LH components.

Land Rover also offered several leather colours and specifications, so the upholstery should be visually compared with the buyer’s existing interior.

CONDITION

Used Genuine Land Rover / JLR Leather Seat.

As a used interior component, normal signs of previous use may be present, including:

• Leather creasing

• Surface marks

• Light scratches

• General age-related wear

• Marks to plastic trim

• Marks to metal mounting components

Please inspect all listing photographs carefully for the exact leather colour, upholstery condition, stitching, seat frame, folding mechanism, mounting points and overall condition.

Ideal genuine Land Rover replacement third-row right RH/O/S driver-side leather folding seat assembly for a compatible Discovery 4 L319 7-seat model.