VOLKSWAGEN TRANSPORTER T5 STEEL WHEEL CENTRE CAP 7H0601151B

#85

Genuine used Volkswagen Transporter T5 / T5.1 steel wheel centre cap / hub cap, part number 7H0601151B.

This original VW wheel trim fits into the centre section of compatible factory steel wheels, covering the wheel hub and wheel-bolt area while providing the original Volkswagen exterior appearance.

Part Number: 7H0601151B

VW OE Number: 7H0 601 151 B

Full OE Reference: 7H0601151B RVB

Part Type: Steel Wheel Centre Cap / Hub Cap / Wheel Centre Trim

Application: Genuine VW Steel Wheels

Wheel Size: Selected 16” & 17” VW steel wheels

Colour / Finish: Satin Black with High-Chrome VW Detail

Position: Any Wheel – where compatible

Manufacturer: Volkswagen / VAG

Quantity: 1 Centre Cap

Condition: Genuine used OEM part

Compatibility

Suitable for selected original Volkswagen steel wheels fitted to:

* Volkswagen Transporter T5 – 2003–2009

* Volkswagen Transporter T5.1 / T5 GP – 2010–2015

* Volkswagen Caravelle T5 / T5.1

* Volkswagen Multivan T5 / T5.1

* Volkswagen Shuttle

* Volkswagen California / Camper

* Transporter Panel Van

* Kombi

* Minibus / passenger variants

* Selected Volkswagen Transporter T6 applications

* Selected Volkswagen Amarok applications

Genuine VW parts information lists 7H0601151B RVB for compatible 16-inch and 17-inch factory steel wheels.

Important Wheel Compatibility Information

This centre cap is not automatically suitable for every T5/T5.1 wheel.

Compatibility depends on the actual wheel design.

It is intended for selected genuine VW steel wheels with the corresponding centre-cap mounting arrangement.

Before ordering, compare:

* 7H0601151B

* Existing centre cap

* Steel wheel design

* Wheel diameter

* Centre mounting arrangement

* Retaining clips

* Wheel part number where available

If replacing a missing cap, comparing the part number from another original cap on the vehicle is one of the safest compatibility checks.

Technical Information

The centre cap installs into the central area of the steel wheel and is retained mechanically by its moulded mounting/retaining structure.

Its main functions are to:

* Cover the central wheel/hub area

* Cover the wheel-bolt region on compatible wheels

* Improve the appearance of factory steel wheels

* Provide the original VW exterior finish

* Protect the covered area from some direct exposure to dirt and road debris

This is a cosmetic/protective wheel component and does not affect wheel balancing or vehicle electronics.

16” & 17” Steel Wheel Information

The genuine 7H0601151B RVB centre cap is documented for selected original Volkswagen:

* 16-inch steel wheels

* 17-inch steel wheels

However, wheel diameter alone does not guarantee compatibility.

Different VW steel-wheel designs can use different centre trims, so the wheel’s centre profile and mounting arrangement must also match.

Common Reasons for Replacement

Typical reasons for replacing a wheel centre cap include:

* Original cap missing

* Cap lost while driving

* Broken retaining clips

* Cracked plastic

* Damaged VW emblem

* Scratched surface

* Faded finish

* Discolouration

* Impact damage

* Loose fitment

* Previous wheel refurbishment

* Cosmetic restoration

These caps are particularly useful when restoring original VW steel wheels to their factory appearance.

Retaining Clip Information

Before fitting, inspect the retaining areas carefully.

A centre cap with damaged or excessively worn retaining points may not remain securely attached to the wheel.

Check for:

* Broken clips

* Cracked retaining points

* Distorted plastic

* Previous repairs

* Excessive wear

* Damage around the outer retaining edge

The cap should sit securely once correctly installed.

Installation

Installation is mechanical and normally straightforward.

Before fitting:

* Clean the wheel centre

* Compare the replacement with the original

* Check all retaining points

* Check the wheel mounting profile

* Align the cap correctly

Press the centre cap evenly into its correct position.

Avoid striking the cap directly with a metal hammer or applying excessive force, as the plastic retaining structure can be damaged.

Removal

When removing a used centre cap, use appropriate trim-removal methods and work evenly around the cap.

Avoid excessive levering against one point, as this can:

* Crack the cap

* Break retaining clips

* Mark the steel wheel

* Damage the outer edge

Older plastic can become more brittle with age.

Programming / Coding

No programming or coding is required.

This is a purely mechanical wheel trim component.

Important Compatibility Note

Please compare before ordering:

* OE number – 7H0601151B

* Full reference – 7H0601151B RVB

* Existing centre cap

* Wheel diameter

* Steel wheel design

* Wheel centre profile

* Retaining arrangement

* Wheel part number where available

Do not purchase solely based on the vehicle being a Transporter T5/T5.1.

Volkswagen used multiple wheel designs across different model years, trim levels and vehicle specifications.

Matching 7H0601151B with an existing cap or confirming compatibility with the actual steel-wheel part number is strongly recommended.

Condition

Genuine Volkswagen used steel wheel centre cap.

As a used exterior wheel component, normal signs of previous use may include:

* Surface marks

* Scratches

* Stone marks

* Dirt

* Fading

* Discolouration

* Chrome/finish wear

* General age-related cosmetic wear

* Installation/removal marks

Please inspect all listing photographs carefully for the exact cosmetic condition.

Pay particular attention to:

* VW emblem

* Front finish

* Outer edge

* Rear retaining points

* Clips

* Plastic mounting structure

* OE markings

Quantity: 1 centre cap unless otherwise stated or shown.

Any identifying colour/security markings applied to the part must remain intact in the event of a return.

Ideal genuine replacement for a missing, cracked, damaged or worn Volkswagen Transporter T5 / T5.1 steel wheel centre hub cap, provided 7H0601151B / 7H0 601 151 B matches the original component and wheel design.