#33
Genuine used Volkswagen New Beetle Steering Angle Sensor / Airbag Clock Spring / Slip Ring Assembly, OE part number 1J0959654AP.
Part Number: 1J0959654AP
OE Number: 1J0 959 654 AP
Part Type: Steering Angle Sensor / Clock Spring / Slip Ring
Sensor Designation: G85 – Steering Angle Sensor
System: ESP / ABS / Airbag / Steering Electronics
Position: Steering Column – Behind Steering Wheel
Manufacturer: Volkswagen / VAG
Condition: Genuine used part
Compatibility
Volkswagen New Beetle 9C / 1C – 2002–2010
* New Beetle Hatchback
* Petrol models
* Diesel models
* Vehicles equipped with ESP / Electronic Stability Programme
* Vehicles equipped with the corresponding steering-angle sensor arrangement
Volkswagen New Beetle Cabriolet 1Y – 2003–2010
* Convertible models
* Vehicles with compatible ESP system
* Vehicles using the matching steering-wheel / airbag configuration
VW’s own parts information lists the later replacement clockspring 1J0959654BK for Beetle 2002–2010 and specifically includes 1J0959654AP among its superseded numbers. (VW Parts)
Additional Compatible VAG Applications
The 1J0959654AP steering-angle sensor / clockspring family was also used on selected:
Volkswagen Golf Mk4 / Golf IV
* Approximately 1997–2006
* Vehicles with ESP
Volkswagen Bora / Jetta Mk4
* Approximately 1998–2005
* Vehicles with ESP
Volkswagen Passat B5 / B5.5
* Selected 1997–2005 applications
Volkswagen Sharan
* Selected applications
Audi TT 8N
* Selected 1999–2006 ESP-equipped models
It is also cross-referenced to selected SEAT and Škoda applications. (Xenone)
OE / Replacement Numbers
Depending on vehicle specification and production date, this component is associated with numbers including:
* 1J0959654AP
* 1J0959654AC
* 1J0959654AG
* 1J0959654BK
* 1J0959654BL
The original 1J0959654AP was superseded in the VAG parts system, with later replacement numbers varying according to market and application. (OEM Wolf)
Technical Information
This assembly sits behind the steering wheel and combines important steering and safety-system functions.
The integrated G85 steering-angle sensor measures:
* Steering wheel position
* Steering direction
* Steering angle
* Driver steering input
This information is used by the ABS / ESP stability-control system to determine the driver’s intended direction of travel.
The clockspring / slip-ring section maintains the electrical connection between the rotating steering wheel and fixed steering-column wiring.
Depending on vehicle specification, this includes connections for:
* Driver airbag
* Horn
* Steering-wheel electrical circuits
* ESP steering-angle information
Common Symptoms / Reasons for Replacement
A faulty steering-angle sensor or clockspring can cause:
* ESP warning light illuminated
* ABS / ESP fault warning
* Traction-control problems
* G85 steering-angle sensor fault
* Incorrect steering-angle readings
* ESP system unavailable
* Airbag warning light
* Driver airbag circuit fault
* Horn not operating
* Intermittent steering-wheel electrical faults
Common diagnostic references associated with this system can include:
00778 – Steering Angle Sensor G85
Other airbag-related faults may occur if the clockspring ribbon circuit becomes damaged.
Diagnostics
Before replacement, scan the vehicle’s:
* ABS / ESP control module
* Airbag control module
* Steering electronics where applicable
Also check:
* Steering-angle live data
* Electrical connectors
* Wiring
* ABS/ESP fault codes
* Steering-wheel position
* Battery voltage
An ESP warning light does not automatically mean the G85 sensor itself has failed.
Installation
Important: The clockspring must be installed in its correctly centred position.
The front wheels and steering wheel should be positioned correctly before installation.
Incorrect installation or rotating the clockspring beyond its permitted range can damage the internal ribbon cable when the steering wheel is turned.
Because this component forms part of the airbag/SRS system, installation should be carried out using the correct safety procedures.
Programming / Calibration
Steering-angle sensor basic setting / calibration may be required after installation.
VAG diagnostic equipment such as VCDS, VAS or equivalent professional diagnostic equipment can be used to perform the required G85 basic setting.
Technical information for this sensor family specifies that the G85 sensor should be installed in its centre position and a basic setting carried out after replacement. (Xenone)
Important Compatibility Note
Please match part number 1J0959654AP / 1J0 959 654 AP with your original unit before ordering.
Compatibility depends on:
* Vehicle production date
* ESP equipment
* Steering-angle sensor specification
* Airbag configuration
* Steering-wheel equipment
* Connector arrangement
* Original OE number
Several visually similar VW clocksprings were fitted, so do not purchase based only on the vehicle model or year.
Where the original vehicle uses a superseded number such as 1J0959654AG or 1J0959654BK, compatibility should be checked against the vehicle specification before installation.
Condition: Genuine used Volkswagen part. Normal cosmetic marks from previous use may be present. Please inspect listing photographs carefully and compare all numbers and electrical connections with your original unit.
Ideal genuine replacement for a faulty VW New Beetle G85 Steering Angle Sensor / Airbag Clock Spring / Slip Ring Assembly 1J0959654AP.
Brand: Volkswagen
Type: Steering Wheel
Manufacturer Part Number: 1J0959654AP
Material: Plastic
Colour: Black