VW T5 TRANSPORTER 2007 1.9 TDI POWER STEERING OIL COOLER 7H0422885D

#102

Genuine used Volkswagen Transporter T5 1.9 TDI Power Steering Oil Cooler / PAS Fluid Cooler, part number 7H0422885D, suitable for selected T5 models equipped with hydraulic power steering.

This cooler forms part of the power-assisted steering hydraulic circuit and helps control the temperature of the power steering fluid during vehicle operation.

Part Details

Part Number: 7H0422885D

VW OE Number: 7H0 422 885 D

Part Type: Power Steering Oil Cooler / PAS Fluid Cooler / Steering Oil Radiator

System: Hydraulic Power Steering System

Position: Front / Engine Bay Area

Donor Vehicle Reference: Volkswagen Transporter T5 2007

Donor Engine: 1.9 TDI

Manufacturer: Volkswagen / Genuine VW

Condition: Used Genuine Part

Compatibility

Suitable for selected:

* Volkswagen Transporter T5 – approximately 2003–2010

* Volkswagen Caravelle T5

* Volkswagen Multivan T5

* Volkswagen California T5

* Transporter Panel Van

* Transporter Kombi

* Transporter Shuttle

* Transporter Platform / Chassis Cab

* Selected 4Motion applications

Engine Compatibility

Confirmed catalogue applications include selected:

1.9 TDI

* BRS

2.5 TDI

* AXD

* AXE

* BNZ

* BPC

The supplied part is from a 2007 Volkswagen Transporter T5 1.9 TDI, making this an especially relevant application for the listing.

Other T5 engines may also use this cooler, but compatibility should be confirmed using the OE number and original component.

Technical Information

The Volkswagen T5 uses hydraulic fluid to transfer assistance from the power steering pump to the steering system.

As the hydraulic fluid circulates through the system it generates and absorbs heat, particularly during:

* Repeated steering movements

* Low-speed manoeuvring

* Parking

* Urban driving

* Heavy vehicle operation

* Prolonged steering-system use

The 7H0422885D power steering cooler provides additional surface area to dissipate this heat before the hydraulic fluid continues circulating through the steering system.

Maintaining the correct fluid temperature helps protect the hydraulic steering components and contributes to consistent steering assistance.

Power Steering System Information

The cooler operates as part of the wider hydraulic steering circuit, which includes components such as:

* Power steering pump

* Power steering fluid reservoir

* Steering rack

* High-pressure hydraulic pipe

* Return hydraulic pipe

* Power steering oil cooler

* Connecting hoses

* Seals and O-rings

* Hydraulic power steering fluid

The cooler itself contains no electrical components and does not electronically control the steering system.

Common Reasons for Replacement

Replacement may be required because of:

* Hydraulic fluid leakage

* Corrosion

* Damaged cooler pipework

* Accident or frontal impact damage

* Bent cooler

* Damaged hose connections

* Cracked or deteriorated pipework

* Previous incorrect repair

* Excessive surface corrosion

* Damage during front-end repairs

Possible Symptoms of a Faulty / Leaking Cooler

Depending on the type of damage, symptoms can include:

* Power steering fluid underneath the vehicle

* Falling PAS fluid level

* Visible fluid around the cooler

* Wet or oily cooler pipework

* Power steering pump noise

* Whining when turning the steering wheel

* Reduced steering assistance if fluid becomes excessively low

* Frequent requirement to top up power steering fluid

A low power steering fluid level should be investigated promptly because continued operation can damage the hydraulic pump.

Important Diagnostic Information

Before replacing the cooler, inspect the complete hydraulic steering system for leaks.

Check:

* Power steering cooler

* Cooler connections

* Hydraulic hoses

* Hose clamps

* Power steering reservoir

* Power steering pump

* Steering rack

* High-pressure pipework

* Return pipework

* Seals and O-rings

Clean contaminated areas before diagnosis where possible, as leaking hydraulic fluid can travel along pipes and make the original leak difficult to identify.

Installation

This is a hydraulic mechanical component.

After installation, the power steering system should be filled with the correct Volkswagen-approved hydraulic fluid and correctly bled according to the appropriate workshop procedure.

Do not operate the power steering pump without sufficient hydraulic fluid.

All hose connections should be inspected for leaks after installation.

Programming / Coding

No programming or coding required.

This is a mechanical/hydraulic steering-system component.

Part Number / Revision Information

OE Number: 7H0422885D

VW Format: 7H0 422 885 D

Earlier related OE revisions include:

7H0422885

7H0422885A

7H0422885B

7H0422885C

These numbers are catalogued within the same power-steering cooler family, with 7H0422885D appearing as a later revision.

However, buyers should still compare the connections, mounting arrangement and original OE number before ordering.

Important Compatibility Note

Volkswagen Transporter T5 models were produced with different steering and hydraulic configurations.

Before purchasing, please compare:

OE Number: 7H0422885D / 7H0 422 885 D

Vehicle model and year

Engine code

Hydraulic pipe connections

Cooler dimensions and shape

Mounting points

Original component design

For the most reliable compatibility check, match the OE number against the original cooler or confirm fitment using the vehicle VIN.

Condition

Used genuine Volkswagen part.

As a used under-bonnet/front-mounted component, the item may show normal cosmetic marks, dirt, staining, surface oxidation, scratches and other signs of previous installation and road use.

Please inspect all supplied photographs carefully, particularly the pipe connections, cooler body and mounting points, before purchasing.

An ideal genuine replacement for a leaking, corroded, bent or damaged Volkswagen Transporter T5 power steering oil cooler.