VW Transporter T5 2007 1.9 BRS Cover Splash Wall Panel Left 7H0805207A #123

#123

Genuine used Volkswagen Transporter T5 left-hand splash wall / engine-bay protection cover panel, part number 7H0805207A, removed from a 2007 VW Transporter T5 1.9 TDI BRS.

This factory-fitted protective panel is positioned on the left-hand side of the vehicle and helps cover and protect the surrounding body/engine-compartment area from dirt, water spray, road contamination and general exposure.

Part Number: 7H0805207A

VW OE Number: 7H0 805 207 A

Part Type: Splash Wall Cover / Protection Panel / Engine Bay Cover / Scuttle Protection Panel

Position: Front Left

Vehicle Side: Left / N/S on UK RHD vehicle

Donor Vehicle: Volkswagen Transporter T5 – 2007

Donor Engine: 1.9 TDI BRS

Engine Output: 75 kW / 102 PS

Material: Moulded Plastic

Manufacturer: Volkswagen / VAG

Condition: Genuine used part

Stock Reference: #123

Compatibility

Suitable for selected:

* Volkswagen Transporter T5 – 2003–2009

* Volkswagen Caravelle T5

* Volkswagen Multivan T5

* Volkswagen California T5

* Transporter Panel Van

* Transporter Kombi

* Shuttle / passenger variants

* Chassis cab / flatbed variants where the same panel configuration is fitted

Known donor application:

* 2007 Volkswagen Transporter T5

* 1.9 TDI BRS – 75 kW / 102 PS

The genuine 7H0805207A reference is used across multiple T5 configurations and is not specific to the BRS engine.

Compatibility is primarily determined by the body configuration, production specification, mounting points and OE number rather than engine capacity.

Technical Information

The splash wall cover is a moulded protective body component installed around the front/left area of the vehicle.

Its purpose is to provide an additional barrier between exposed areas of the vehicle and contamination generated during normal driving.

It helps protect against:

* Road dirt

* Water spray

* Mud

* Dust

* Stones and road debris

* General engine-bay contamination

It also provides the correct factory finish around the surrounding body structure.

Body Protection System Information

Volkswagen uses a number of plastic covers, shields and splash panels around the T5 engine compartment and front body structure.

These components work together to help reduce direct exposure of surrounding components and bodywork to road contamination.

Although the vehicle can sometimes still be driven with a damaged or missing panel, replacing it helps restore the original factory protection and installation.

Common Reasons for Replacement

Typical reasons for replacing this panel include:

* Cracked plastic

* Broken mounting points

* Missing panel

* Accident damage

* Previous engine or body repair damage

* Damaged screw/clip locations

* Panel hanging loose

* Heavy abrasion

* Previous incorrect removal

* Missing panel after mechanical repairs

Because these panels are exposed to heat, dirt, moisture and vibration, older plastic can become brittle around mounting points.

Important Diagnostic / Inspection Information

Before replacing the panel, inspect the surrounding mounting locations.

Check for:

* Missing screws or clips

* Broken mounting tabs

* Damaged body mounting points

* Cracked adjacent panels

* Incorrectly routed wiring

* Incorrectly routed hoses

* Previous accident damage

If the original cover has come loose, identify why before installing the replacement.

A damaged or missing retaining clip can allow a replacement panel to move or vibrate after installation.

Installation

Installation is mechanical and does not require specialist electronic equipment.

Before fitting:

* Compare the replacement with the original panel

* Check all mounting holes

* Inspect mounting tabs

* Check surrounding brackets

* Retain or replace damaged clips/fasteners

* Clean the mounting area

Position the panel in its original factory location and secure it using the correct mounting hardware.

Avoid overtightening fasteners into aged plastic, as excessive force can damage the mounting points.

Engine Compatibility Information

This particular part was removed from a 1.9 TDI BRS vehicle.

However, the splash panel itself is a body/protection component rather than an engine-management component.

Therefore, the BRS engine code does not mean the panel is exclusive to BRS-powered vehicles.

The same 7H0805207A reference may be fitted to Transporters with different engine configurations where the corresponding body and mounting arrangement is used.

Programming / Coding

No programming or coding is required.

This is a purely mechanical body/protection component with no electrical connection.

Important Compatibility Note

Please compare before ordering:

* OE number – 7H0805207A

* Left-hand position

* Overall panel shape

* Mounting-hole locations

* Mounting tabs

* Vehicle body configuration

* Production year

* Surrounding panels

For UK right-hand-drive vehicles:

Left = N/S / Passenger Side

Please do not rely solely on the vehicle’s engine size or BRS engine code when determining compatibility.

Matching 7H0805207A directly with the original panel is the safest method.

Condition

Genuine Volkswagen used body/protection component.

As a used under-bonnet/protective plastic part, normal signs of previous use may include:

* Scratches

* Surface marks

* Dirt

* Dust

* Road contamination

* Light staining

* General age-related wear

Please inspect the listing photographs carefully, particularly the mounting holes, fixing points, edges and plastic tabs.

Any clips, screws or additional fixings are included only if shown in the listing photographs.

Any identifying colour/security markings applied to the part must remain intact in the event of a return.

Ideal genuine replacement for a missing, cracked or damaged Volkswagen Transporter T5 left N/S splash wall/protection cover, provided 7H0805207A matches the original component.